| |
XCM8060SA |
XCM8040SA |
| Number of pixels (bit) |
8192 |
| Pixel size (HxV: μm) |
7×7(Fill Factor≒90％) |
| Photo array length (mm) |
57.344 |
| Spectral sensitivity (mm) |
400～1000 ※Peak: 600 |
| Data rate (MHz) |
240（60×4）fixed |
160（40×4）fixed |
| Shortest scan cycle (μs/kHz) |
35.7[27.9Khz] |
53.6[18.6Khz] |
Analog 5V conversion sensitivity
(V/lx・s) ※Typ |
70[gain×1] |
| Saturation exposure ( lx・s) |
0.071[gain x1] |
| RGB gain adjustment |
Amplifier 1: x1, x2.6, x 3.6
Amplifer 2: x1～2.183 (1.13dB/step) |
| Video output |
Camera Link medium configuration (8- or 10-bit, 4-tap) |
| Control input |
CC1, 2: external trigger CC3, 4: not used |
| Serial communication control |
Camera Link compliant |
| Driving clock (MHz) |
60 (internal) |
40 (internal) |
| Connector: data, control |
3M: MDR26 (Camera Link) x2 |
| Connector: power supply |
Hirose: HR10A (4-pin) |
Hirose: HR10A (4-pin) |
| Lens mount |
M72 x 0.75 |
M72 x 0.75 |
| Operating temperature range (℃) |
0～40 ※No condensation |
| Power voltage (V) |
12～15±5% |
| Consumption current (mA) ※tpy |
500 |
| External size (WxHxD: mm) |
80x120x65
※Excludes connector and screw protrusions |
| Weight ※Main body only |
Under 600g |
| Special note |
Camera Link interface |
Camera Link interface |
| Additional functions |
Flat output digital correction (8-bit) ON/OFF
Programmable exposure control
Output block selection
Test pattern output |